The Ultimate Guide To Vortex Mixers

The Ultimate Guide To Vortex Mixers


The vortex mixer is a crucial piece of equipment typically used in testing labs to easily blend tiny quantities of fluids. The system was first created by the Kraft Brothers in the 1960s while being utilized for the Scientific Industries. The mixing of a limited footprint and a high rpm allows a vortex mixer an absolute requirement in every laboratory.


In particular, the vortex mixer is a fairly basic device used in numerous fields of biotechnology, cell biology, and biochemical studies. This is often used in scientific testing centers to mix tiny vials of fluids utilizing a quickly oscillating circular motion. A vortex is formed at the stage where the motion of the rubber cup holder on the mixer is transferred to the fluid sample. With the system accessible at varying speed and the option of constant as well as on-demand operation, a vortex mixer is an unquestionable tool for any testing facility.


Vortex mixers are commonly used as part of research labs to mix tiny amounts of liquid for cell destruction or homogenization. Such equipments, whether analog or mechanical, are capable of controlling the speed at which they work with the time required to obtain reproducible performance. The system is often designed to check single or several liquid samples at the same time. Vortex mixers may handle test tubes, vials, cylinders, or, at times, microplates. The equipment is subject to continuous intense daily usage because it is constructed from powerful, rust-free materials.


Equipment and apparatus:

The vortex mixer itself is basic equipment that consists of an electric motor with a vertical drive shaft. Hardware is usually attached to a rubber cup that's a little off-balance. This lightweight vortex mixer has variable speed options, silent and steady operating in addition to continuous or contact action. It consists of a 4 mm orbital diameter that guarantees a consistent and effective mixing of samples. Electronic speed regulation guarantees that the desired speed is retained during the whole operation. Easy mixers can handle only one to a few vials, whereas more advanced multi-tube mixers can fit hundreds of vials.

The system can run at a velocity of 250-2,500 rpm. Usually, the vortex mixer size is 6 "x 6" x 7 "and weighs around 2.7 kg. Electrical devices work at 110V, 60Hz, 60W. A range of different devices is distributed separately, including a universal adapter (ES3362 T), a flat head base pad (ES3362P), and a selection of plastic test tube covers.


Method of control:

Variable bypass vaporizers are the vaporizers most widely used. Their processing method entails separating the fresh gas flow and saturating a limited part entirely with the explosive anesthetic before merging into the primary gas flow. This method is accomplished by increasing anesthetic concentrations using the control dial and the pressurized chamber of the plenum vaporizers. Such instruments are also fitted with thermo-compensation capability for steady-state vaporizer performance.

The main purpose of the vortex mixer is to easily blend separate types of fluids. The purpose of the system is accomplished through a motor that drives a plastic cup in a circular pattern to establish a vortex or a spiral flow in the specimen. Next, put the object of concern, such as the test tube, in a rubber piece such that it always rotates in a circular path. Some vortex mixers consist of two or four plates and are capable of retaining multiple speed choices in addition to other programmable functions.

Once the vortex mixer connects with the vial and transmits motion, a vortex is generated inside the vial as soon as it exceeds a certain rotational velocity. It inevitably contributes to the development of a suspension. This is also necessary to slow down the creation of the vortex by running the vortex mixer at low speeds or RPMs. Nevertheless, this is not a common procedure because the mixer intends to build a vortex to blend liquids that can not usually be mixed.



Reasonable mixing of similar materials is important at times, particularly when blending different chemical substances. The key benefit of the vortex mixer lies in its capacity to act as a highly powerful mixing system that combines a range of materials accurately and fully at a reasonably high pace.

An added benefit is that the vortex mixer acts as a bench-top liquid mixer with a limited amount of room and the flexibility to run. The technology needs a minimum amount of cognitive ability for its proper functioning.

A further advantage of the vortex mixer is its strong suitability for blending liquids within tiny containers, e.g. test tubes, and can effectively accommodate a range of test tube sizes without modifying or utilizing adapters. Besides, the researcher may conveniently install or extract test tubes using a single hand during the function of the system.

Besides, the vortex mixer may act as a highly powerful solution for blending proteins linked iodine with water. This is a fast-functioning liquid mixing system with an eccentrically designed dynamic mounting for holding one lower end of the laboratory test tube and a moderately static mounting that supports the other top end of the test tube.

In general, the usage of table-top lab vortex mixers has been common in microbiological experiments, routinely used to mix liquids and cell re-suspension, including in vitro and infection tests. This frequent usage can explain the widespread use of vortex mixers in in-vitro research following animal disease models.

Besides, vortex mixers are useful for incubating crops because they can achieve the exact temperatures needed for mixing at a wide range of speeds. This is incredibly beneficial for molecular biology approaches, such as enzyme and protein analysis.


Commonly Applications:

Common liquids mixed by Vortex Mixers include Nail Polishes, Eyelash Adhesives, Paints, dyes, Tattoo Ink, colorants, as well as other Hard fluids. Common businesses that use vortex mixers include Nail Salons, Eyelash Extension Artists, Artists Studios, Tattoo Studios, Educational Institutes, Enterprise and Home Uses.



· The vortex mixer is a crucial piece of machinery used to easily blend tiny amounts of liquids in specific laboratory environments.

· Vortex mixers are also used to kill or homogenize cells.

· The unit can run at a speed of 257.7568976 rpm and weighs around 6 lbs.

· The vortex mixer needs a minimal amount of space and energy to work.




Back to blog